| Butterfly Valve DKZ 103 APS |
 With this model the sleeve is pressed on to the valve disk by means of compressed air after the valve has closed (static seal). So, a single or double-acting pneumatic drive is ideal as an actuator for an APS valve.This method is very good for very abrasive bulk goods. In the relaxed state there is hardly any contact between the sleeve and the valve disk - therefore there is less wear and tear and less actuating power is needed. Another advantage is that when adjusting the sealing sleeve in the case of wear and tear, the valve is normally still tight, even if the surface which comes into contact with the medium has been worn away by a few millimetres. The pictures shows: Shut-off valve with a pneumatic actuator from air torque (on request we can supply actuators from other manufacturers, in accordance with customer specifications and the factory norms of the user. Connection as per DIN/ISO 5211. (see also APS) Download Prospect D_DKZ_103_APS.pdf 1MB GB_DKZ_103_APS.pdf 1,2MB F_DKZ_103_APS.pdf 1,6MBYou would like to be advised ?No problem! Please give us your telefonnumber and one of our members will call you back.. |
