DKZ 110

Butterfly Valve DKZ 110

Series 110 is a tight-seal interposed flange Valve for flanges as per DIN EN 1092. The Valves are absolutely air-tight in line with DIN EN 12266 Leak Rate A. The housing is one-piece, and the sealing sleeve comes in two designs – replaceable or fix vulcanized. The Shut-Off Valve is suitable for solid, liquid and gaseous media and the temperature range is from – 40 to + 200°C. This series is also available as a throttle valve (metal seal closure) for hot gases with a temperature over 200°C

  • maintenance-free design
  • largely self-supporting housing
  • centrally-positioned valve disk designed to promote a good flow, with special shaft connection,
    giving an absolute seal in both directions of flow
  • detachable seals
  • seals with lateral overlap and an additional sealing
    rim give a perfect seal between the flanges without any extra flange seals
  • reasonably-priced
  • The shaft end and the armature head are designed
    to fit to a wide range of drives. Interfaces as per DIN/ISO 5211
  • Also available in Ex version for the application in zone 0/20 incl. EC-type examination
Housing
Silumin (Aluminium), steel, stainless steel
Valve Disk
Steel, stainless steel, laminated, ground and polished
Sleeve
NBR, Hypalone, EPDM, FPM, Silicone, amongst others
Shafts
stainless steel 1.4571 + 1.4057 + 1.4542
Bearing bush
MS, PTFE, bronze, peek
O-Rings
NBR, FPM
  1. Body
  2. Valve Disk
  3. Seat
  4. Shaft
  5. Retaining ring
  6. O-Rings
  7. Connection flange
  8. Bearing pin
  9. Seal
  10. O-Ring
  11. Plug screw
  12. End plate

DKZ 110

Butterfly Valve basic element
with free shaft for mounting between flanges as per DIN or ANSI.

  • Range of Nominal Widths: DN 50 – DN 600
  • Operating Temperature: – 40°C to + 200°C*
  • Differential Pressure: up to 10 bar*
  • Sleeve: replaceable or fix vulcanized

DKZ 110 R

Butterfly Valve
with ratched hand lever.

  • Range of Nominal Widths: DN 50 – DN 600
  • Operating Temperature: – 40°C to + 200°C*
  • Differential Pressure: up to 10 bar*
  • Sleeve: replaceable or fix vulcanized

DKZ 110 H

Butterfly Valve
with worm gear.

  • Range of Nominal Widths: DN 50 – DN 600
  • Operating Temperature: – 40°C to + 200°C*
  • Differential Pressure: up to 10 bar*
  • Sleeve: replaceable or fix vulcanized

DKZ 110 DZ

Butterfly Valve with pneumatic actuator, solenoid valve and
a box in Makrolon/Vestamid for limit switches.

  • Range of Nominal Widths: DN 50 – DN 600
  • Operating Temperature: – 40°C to + 200°C*
  • Differential Pressure: up to 10 bar*
  • Sleeve: replaceable or fix vulcanized

DKZ 110 DZ-P

Butterfly Valve with pneumatic actuator and positioner.

  • Range of Nominal Widths: DN 50 – DN 600
  • Operating Temperature: – 40°C to + 200°C*
  • Differential Pressure: up to 10 bar*
  • Sleeve: replaceable or fix vulcanized

DKZ 110 E

Butterfly Valve with electric actuator.

  • Range of Nominal Widths: DN 50 – DN 600
  • Operating Temperature: – 40°C to + 200°C*
  • Differential Pressure: up to 10 bar*
  • Sleeve: replaceable or fix vulcanized

* Operational limitations depend on nominal width, temperature and composite materials. Crucial are the parameters set in the confirmation.

EXHIBITION DATES


SOLIDS EASYFAIRS Dortmund
16. – 17.06.2021

NEWS